Licensee Of
Maelstrom High
Shear Mixers - U.K

Distromix FDM

DB75 - DB200

Batch High Shear Mixers

 Download flyer

  • Pilot & production scale mixers
  • High Flow options for
    improved agitation & blending
  • Wide range of mounting options
  • ATEX (flameproof) options
  • Easily cleanable
  • Interchangeable heads


Use General pilot-scale or full production-scale high shear mixing
Mixing head configuration Standard: 2/3 (2 cavity rows on stator, 3 on rotor)
Options: 3/4 and 4/4 heads available
Construction materials Wetted parts - 300 series stainless steel standard (other materials such as titanium, Hastelloy and ceramics are available on request)
Bearings - lower polymer bush (FDA-approved material) upper rolling element bearings standard. Note that the standard mixer must NOT be run dry.
Base and Housing - stainless steel or painted structural steel as required
Electrical supply 380-420V, 50/60Hz, 3-phase - other options on request
Options High Flow - a removable half-height or full-height impeller can be fitted to the back of the rotor to act as an additional agitator in the vessel. This can multiply general flow by more than 10 times if a high degree of agitation is needed.
ATEX-compliant - a wide range of EExd motors is available.
Hygienic - to meet the requirements of cGMP and other standards